|
Post by djway3474 on Nov 19, 2008 14:48:20 GMT -8
Well this has been an 8 year journey. I purchased this partially built car a long time ago and dug right in. I took me a while to find all the parts and find good referance pictures (thank Brian). I did not like the look of the stock wheel tire combo so I hit the parts box and pulled out some old Pegasus wheels. I normally don't like tri blades but the looked good here and I installed them in a counter rotating fashion. Paint is a base silver with Tamiya clear red over that then covered by Urethane clear. I added plug wires and a shaft to the blower fans. I was going to put the motor in the car but I found that you can't see it with the rear in an open position so I placed it in the motor display case that comes with the car. The seat are supposed to raise up when you oppen the rear bonnette but the double hinge won't let it totally close so I disconnected that. I had to cut the interior tub in two sections so I could assemble the body before painting and all would register correctly afterwards. link to build public.fotki.com/djway3474/model-car-projects/astro-1-concept-car/Hosted on FotkiHosted on FotkiHosted on Fotki
|
|
|
Post by chevyguy62 on Nov 20, 2008 6:28:58 GMT -8
Hey DJ very cool resto's as always. I like this kit but have never ran across one yet. I like the box art for it. I will have to look a bit harder for one now that I have seen one built up makes a cool build
|
|